2022 Caterpillar Landfill Compactors 816K
- Year 2022
- Make Caterpillar
- Model Landfill Compactors
- Engine Model: Cat® C7.1:
2022 Caterpillar Landfill Compactors 816K
OVERVIEWPurpose-built for landfill operation, the Cat 816K delivers features, performance and efficiency that come from over 45-plus years of industry leadership. Field-proven protection and integrated technologies provide peak availability and optimized landfill performance.
Features may include:
POWERFUL EFFICIENCY- Advanced Productivity Electronic Control System (APECS) delivers improved transmission shifting performance and a higher level of comfort for operators.
- Decelerator pedal acts as a brake, transmission neutralizer and an engine decelerator to override the engine speed selected by the throttle lock. Allows the operator to slow speeds when the throttle lock is engaged and to return to throttle lock without pressing a resume or set button.
- Electro hydraulic controls increase productivity with responsive implements feature. Operate comfortably with easy-to-use soft-detent controls.
- Steering System provides confident machine operation and precise control enabled by the 815K's load sensing hydraulic steering system.
- Increased efficiency with variable displacement piston pumps that give operators precise positioning for easy maneuvering in tight areas with 42 degree articulation in each direction.
- Steering and Transmission Integrated Control System (STIC™) enhances operator comfort by integrating steering and transmission control functions in a single lever. Includes finger-controlled gear selection.
- Designed and made with purpose-built structures to remain safe and durable for the long run.
- Long-life-designs, materials and robotic welding ensure multiple life cycles and ability to withstand the toughest conditions.
- Full box-section rear frame resists torsional shock and twisting forces.
- Heavy-duty steering-cylinder mounts efficiently conduct steering loads into the frame.
- Advanced Productivity Electronic Control System (APECS) delivers consistent, smooth shifting and efficiency through integrated electronic controls.
- Strategic use of metallurgy and heat treating ensures long-life gears.
- The Cat C7.1 engine is designed for maximum fuel efficiency and increased power density.
- Two engine options are available to meet Tier 4 Final/Stage IV or Tier 3/Stage IIIA equivalent emission standards. (depending upon market).
- Engine features innovative Cat electronics, fuel injection process, air-management systems, aftertreatment solution with Cat selective catalytic reduction.
- Integrated systems intelligently lower working engine speeds and reduce overall system heat loads resulting in improved performance and fuel efficiency.
- Next generation fuel injection systems control fuel metering through a series of carefully timed microbursts providing cleaner combustion and the most efficient fuel burn.
- New long-life Paddle and Plus design tip options.
- Up to 40% longer life.
- Purpose designed for Cat Landfill Compactors.
- Improved machine performance.
- Improved traction.
- Select Paddle Tip for traction and fuel economy.
- Select Plus Tip for increased side-slope stability.
- Select combination of both to optimize performance in your conditions.
- Pressurized cab sits on isolation mounts improving comfort and reducing sound.
- Cab features a convenient floor storage tray/lunch box.
Engine
Engine Power
Gross: 284 HP | Net: 248 HP | Gross - ISO 14396 - Tier 4 Final/Stage IV: 274 HP | Gross - SAE J1995 - Tier 3/Stage IIIA Equivalent: 286 HP | Gross - SAE J1995 - Tier 4 Final/Stage IV: 284 HP | Gross - ISO 14396 - Tier 3/Stage IIIA Equivalent: 275 HP
Engine
Model: Cat® C7.1:
Engine Torque
Rise: 52 % | Maximum Net - 1,400 rpm - Tier 4 Final/Stage IV: 899 lb/ft | Maximum Net - 1,400 rpm - Tier 3/Stage IIIA Equivalent: 749 lb/ft
Bore
4.1 in
Stroke
5.3 in
Displacement
427.8 in³
Rated Engine Speed
Tier 3/Stage IIIA Equivalent: 249 HP | Power (Net ISO 9249) - Tier 4 Final/Stage IV: 248 HP | Power (Net ISO 9249) - Tier 3/Stage IIIA equivalent: 249 HP | Power (SAE J1349) - Tier 4 Final/Stage IV: 248 HP
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
Drivetrain
Transmission
Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)
Steering
System - Pump: Piston – Variable Displacement | System - Circuit: Closed Center Load Sensing
Brakes
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Operational
Operating Speed
High Idle: 2270 r/min | Low Idle: 800 r/min | Travel - Forward - Second: 6.8 mile/h | Travel - Reverse - First: 4.3 mile/h | Travel - Forward - First: 3.8 mile/h | Travel - Reverse - Second: 7.8 mile/h
Hydraulics
Airflow
Pump at 2,111 rpm: 23.5 gal/min | Maximum System : 147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
Maximum Pressure
Maximum Supply: 2930 psi | Main Relief: 3190 psi | Steering Limited: 4003 psi
Performance
Noise Level
Operator Sound Level - ISO 6396: 70 dB(A) | Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent: 110 dB(A) | Machine Sound Level (ISO 6395) Tier 4 Final/Stage IV: 109 dB(A)
Dimensions
Dimensions
Maximum Altitude - Without Derating: 9842.52 ft | Oscillation Angle: ±6° | Hitch to Centerline of Front Axle: 5.5 ft | Centerline of Rear Axle to Bumper: 6.5 ft | Vehicle Articulation Angle: 84 ° | Paddle Tips - Drum Diameter: 55.1 in | Paddle Tips - Outside Diameter: 67.6 in | Plus Tips - Outside Diameter: 67.6 in | Plus Tips - Drum Diameter: 55.1 in
Bore
Cylinders, Double Acting - Lift: 4.7 in (120 mm) | Steering: 4 in
Stroke
Cylinders, Double Acting - Lift: 36 in (915 mm) | Steering: 23.5 in
Height
Top of Exhaust Pipe: 11.5 ft | Top of Hood: 8.9 ft | Cab Roof: 12.7 ft | Top of Beacon: 14.3 ft | Paddle Tips - Tip: 6.25 in | Plus Tips - Tip: 6.25 in | Combo Wheels - Tip: 6.25 in | Including Cutting Edge and Screen: 6.4 ft
Ground Clearance
Bumper: 2.7 ft | 1.7 ft | Maximum Lift Above: 3.7 ft
Wheelbase
11 ft
Width
Over Wheels: 131.4 ft | Paddle Tips - over Drums: 131.4 in | Plus Tips - Drum: 40 in | Paddle Tips - Drum: 40 in | Plus Tips - over Drums: 131.4 in | Combo Wheels - Drum: 40 in | Moldboard Length: 11.75 ft | Over End Bits: 12 ft
Overall Length
Maximum: 26.4 ft
Turning Radius
Outside - Blade: 21.2 ft | Inside Turn - Wheels: 8.9 ft | Inside Turn - Blade: 9.5 ft
Wheels
Combo - Outside Diameter: 67.6 in | Combo - Drum Diameter: 55.1 in | Combo - Width over Drums: 131.4 in
Depth, Maximum
of Cut: 1.2 ft
Capacities
Tank Type
DEF: 4.2 gal (US)
Features
Differential - Final Drives - Rear: 11.4 gal (US) | Engine Crankcase: 5.28 gal (US) | Differential - Final Drives - Front: 11.4 gal (US) | Transmission: 14.8 gal (US)
Fuel Capacity
Tank: 132.1 gal (US)
Hydraulic Capacity
Tank Only: 19.8 gal (US)
Cooling System
Tier 4 Final/Stage IV: 21.4 gal (US) | Tier 3/Stage IIIA Equivalent: 19.3 gal (US)
Weights
Weight, In Running Order
Operating: 56899 lb | Maximum Operating (Tier 4 Final/Stage IV): 56899 lb | Maximum Operating (Tier 3/Stage IIIA equivalent): 56308 lb
Weight
Combo Wheels - (Group): 13554 lb | Paddle Tips - (Group): 13126 lb | Plus Tips - (Group): 13982 lb
Features
Features
Front: Planetary – Fixed | Rear: Planetary – Oscillating | Combo Wheels - Replaceable: Welded | Plus Tips - Tips per Row: 5 | Paddle Tips - Tips per Row: 5 | Combo Wheels - Tips per Wheel: 20 | Plus Tips - Replaceable: Welded | Paddle Tips - Tips per Wheel: 20 | Plus Tips - Tips per Wheel: 20 | Combo Wheels - Tips per Row: 5 | Paddle Tips - Replaceable: Welded