2022 Caterpillar Large Wheel Loaders 986K Block Handler Arrangement

Information

2022 Caterpillar Large Wheel Loaders 986K Block Handler Arrangement

DURABILITY FOR YOUR TOUGHEST LOADING CONDITIONS

Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton.

The new 986K continues the legacy of durability, performance, safety, operator comfort, serviceability and sustainability.

Features may include:
  • long Term Value And Durability
  • proven Reliability
  • performance And Productivity
  • operator Comfort And Control
  • technologies - Higher Productivity Through Integrated Electronic Systems
  • safety First
  • save On Service And Maintenance
  • top-tier Service And Support
  • sustainability - Less Environmental Impact
  • purpose Built Specialty Models
  • purpose-built Cat Attachments

Photos

Highlights

  • Saginaw, Michigan
  • 2022
  • Caterpillar
  • Large Wheel Loaders 986K Block Handler Arrangement
  • Type: Cat-Planeten-Lastschaltgetriebe
  • Available
  • B-Pin at Maximum Lift: 15 ft

Specifications

  • 2022
  • Caterpillar
  • Large Wheel Loaders
  • 986K Block Handler Arrangement
  • Large
  • Cat®
  • Model: C15 ™
  • Net Power: 373 HP | Gross Power - ISO 14396: 449 HP | Peak Power Speed - 1,600 rpm - SAE J1995: 456 HP | Peak Power Speed - 1,600 rpm - SAE J1995 (DIN): 462 HP | Peak Power Speed - 1,600 rpm - ISO 14396: 449 HP | Peak Power Speed - 1,600 rpm - ISO 14396 (DIN): 455 HP | Rated Speed - 2,000 rpm - EEC 80/1269: 373 HP | Rated Speed - 2,000 rpm - EEC 80/1269 (DIN): 378 HP | Rated Speed - 2,000 rpm - ISO 9249: 373 HP | Rated Speed - 2,000 rpm - ISO 9249 (DIN): 378 HP | Rated Speed - 2,000 rpm - SAE J1349: 373 HP | Rated Speed - 2,000 rpm - SAE J1349 (DIN): 378 HP
  • Peak Torque - 1,200 rpm - SAE J1995: 1778 lb/ft | Torque Rise: 16%
  • 5.4 in
  • 6.75 in
  • 927 in³
  • U.S. EPA Tier 4 Final/EU Stage IV, or China Nonroad Stage III and Brazil MAR-1 and equivalent to U.S. Tier 3 and EU Stage IIIA
  • Type: Cat-Planeten-Lastschaltgetriebe
  • Forward: 5 mile/h
  • Forward: 8 mile/h | Direct Drive - Forward: 8 mile/h
  • Direct Drive - Forward: 14 mile/h
  • Direct Drive - Forward: 24 mile/h
  • 1: 5 mile/h | 2: 8 mile/h | Direct Drive - 2: 9 mile/h | Direct Drive - 3: 16 mile/h | Direct Drive - 4: 25.4 mile/h
  • ISO 3450: 2011
  • Rack Back: 4.5 s | Raise: 8.5 s | Dump: 3 s | Lower: 4.9 s | Lower Float Down: 4.3 s | Total Hydraulic: 15.8 s
  • Operator (ISO 6396): 72 dB(A) | Machine (ISO 6395): 110 dB(A)
  • ISO 5010:2007 - Steering System: Piston, variable displacement
  • Lift/Tilt System: 2 × 110 cc variable displacement
  • Maximum at 2,165 rpm: 123 gal/min | ISO 5010:2007 - Maximum at 1,400 rpm: 52 gal/min
  • Relief Valve Setting - Lift/Tilt: 4050 psi | ISO 5010:2007 - Steering Cutoff: 4000 psi
  • Lift Cylinder - Bore: 7.5 in | Lift Cylinder - Stroke: 45 in | Tilt Cylinder - Bore: 6.7 in | Tilt Cylinder - Stroke: 22.4 in | Oscillation Angle: ±12.5° | Oscillation Angle - Chain Arrangement: ±8.5° | ISO 5010:2007 - Total Steering Angle: 70° | Ground to Top of ROPS: 13.5 ft | Ground to Top of Exhaust Stacks: 13.3 ft | Ground to Top of Hood: 10.7 ft | Ground to Center of Rear Axle: 3.2 ft | Reach at Maximum: 8 ft | Clearance at Maximum Lift: 10.7 ft | Rear Axle Center Line to Bumper: 10.3 ft | Front Axle Centerline to Bucket Tip: 12.2 ft | Ground to Top of ROPS: 13.5 ft | Ground to Top of Exhaust Stacks: 13.3 ft | Ground to Top of Hood: 10.7 ft | Ground to Center of Rear: 3.2 ft
  • B-Pin at Maximum Lift: 15 ft
  • Maximum, Bucket Raised: 20.9 ft
  • Maximum: 35 ft
  • Ground to Fuel Tank: 2.3 ft | to Lower Hitch: 1.5 ft
  • 12.5 ft
  • Axle Front: Fixed | Axle rear: Trunnion
  • Bucket: 7 yd³ (5.4 m³)
  • Crankcase: 9 gal (US) | Axle Oil - Differentials and Final Drives - Front: 49 gal (US) | Axle Oil - Differentials and Final Drives - Rear: 45 gal (US)
  • Tank: 116 gal (US) | Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only): 6 gal (US)
  • 26 gal (US)
  • System Factory Fill: 87 gal (US) | System - Tank Only: 34 gal (US)
  • 116688 lb
  • Lift/Tilt System - Circuit: Load Sense