2022 Caterpillar Large Wheel Loaders 988K XE

Information

2022 Caterpillar Large Wheel Loaders 988K XE

MOVE MORE MATERIAL EFFICIENTLY AND AT A LOWER COST

Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton.

Introduced in 1963, the 988 has been the industry leader for over 50 years, built on a legacy of reliability, performance, safety, operator comfort, serviceability, and productivity. The 988K XE brings improved sustainability and maximum efficiency to this machine platform.

UP TO 25% BETTER FUEL EFFICIENCY

Experience maximum fuel efficiency by optimizing the powertrain with no shifting required

UP TO 10% LOWER MAINTENANCE COST

Lower overall maintenance costs with a machine designed for long-life use along with rebuild capabilities

UP TO 10% MORE PRODUCTIVITY

An increase in productivity allows the operator to experience superior levels of acceleration and reduced travel times

Features may include:
  • powerful Efficiency
  • long Term Value And Durability
  • proven Reliability
  • performance And Productivity
  • operator Comfort And Control
  • productivity With Technology
  • save On Service And Maintenance
  • top-tier Service And Support
  • safety First
  • reduce Environmental Impact
  • efficient Equipment Match
  • attachments To Meet Your Needs

Photos

Highlights

  • Saginaw, Michigan
  • 2022
  • Caterpillar
  • Large Wheel Loaders 988K XE
  • Type: Cat switched reluctance electric drive
  • Available
  • B-Pin - Maximum Lift: 19.3 ft

Specifications

  • 2022
  • Caterpillar
  • Large Wheel Loaders
  • 988K XE
  • Large
  • Cat®
  • Model: C18 ™
  • Net Power: 541 HP | Net Power - SAE J1349:. 541 HP | Peak Power Speed - 1,500 rpm - Gross - ISO 14396: 580 HP | Peak Power Speed - 1,500 rpm - Gross - SAE J1995: 588 HP | Gross Power - ISO 14396: 580 HP | Peak Power Speed - 1,500 rpm - Net Power - SAE J1349: 541 HP
  • Peak Torque @ (speed) - SAE J1995: 2104 ft·lbf | Torque Rise: 58%
  • 1,700 rpm | Peak: 1,500 rpm
  • 5.7 in
  • 7.2 in
  • 1105 in³
  • U.S. EPA Tier 4 Final/EU Stage IV
  • Forward 1 (virtual): 4.3 mile/h
  • Forward 2 (virtual): 7 mile/h
  • Forward 3 (virtual): 13.8 mile/h
  • Forward 4 (virtual): 20 mile/h
  • virtual 3: 17.5 mile/h | virtual 2: 7 mile/h | virtual 1: 4.3 mile/h
  • Type: Cat switched reluctance electric drive
  • ISO 3450:2011
  • Steering - High Idle: 3.4 s | Steering - Low Idle: 5.6 s | Rack Back: 4.5 s | Raise: 8 s | Lower Float Down: 3.5 s | Total Hydraulic: 18.2 s | Dump: 2.2 s
  • Machine (ISO 6395): 109 dB(A) | Operator (ISO 6396): 72 dB(A)
  • Maximum at 1,400-1,600 rpm: 153 gal/min | Maximum at 1,400-1,600 rpm: 71.3 gal/min
  • Lift/Tilt System: Variable displacement piston
  • Relief Valve Setting - Lift/Tilt: 4757 psi | Steering Cut Off: 4351 psi
  • Lift Cylinder - Bore: 8.7 in | Lift Cylinder - Stroke: 41.3 in | Tilt Cylinder - Bore: 8.7 in | Tilt Cylinder - Stroke: 27 in | Oscillation Angle: 13° | Total Steering Angle: 86° | Ground to Lower Hitch Clearance: 1.9 ft | Clearance at Maximum Lift: 12.7 ft | Ground to Top of Hood: 10.9 ft | Front Axle Centerline to Bucket Tip: 15.9 ft | Ground to Top of Exhaust Stacks: 14.8 ft | Reach - Maximum: 7 ft | Ground to Top of ROPS: 13.7 ft | Ground to Center of Axles: 3.2 ft
  • B-Pin - Maximum Lift: 19.3 ft
  • Maximum - Bucket Raised: 25.8 ft
  • Maximum: 41.3 ft
  • To Bumper: 3.1 ft
  • 14.9 ft
  • Axle front: Fixed | Axle rear: Trunnion
  • Bucket Range: 6.2-17 yd3 (4.7-13 m3)
  • Crankcase: 16 gal (US)
  • 147 gal (US)
  • Jacket Water: 30 gal (US) | Power Train: 8 gal (US)
  • System - Implement/Steering: 126 gal (US)
  • Rated - Standard (Loose Material): 16 t | Rated - High Lift (Loose Material): 16 t | Rated - Standard (Face Material): 12.5 t | Rated - High Lift (Face Material): 12.5 t
  • 116362 lb | High Lift: 119618 lb
  • Tilt System - Pump: Variable displacement piston | Tilt System - Circuit: EH-Positive Flow Control, Flow Sharing