2022 Caterpillar Large Wheel Loaders 990K Steel Mill Arrangement

Information

2022 Caterpillar Large Wheel Loaders 990K Steel Mill Arrangement

BUILT TO WITHSTAND THE HARSHEST CONDITIONS

Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The Cat 990 Wheel Loader has been a proven performer in steel mill applications where larger machines have typically been used. The 990K Steel Mill Arrangement brings all new levels of performance, safety, operator comfort and efficiency in pit digging and skull handling applications.

Features may include:
  • powerful Efficiency
  • long Term Value And Durability
  • proven Reliability
  • performance And Productivity
  • operator Comfort And Control
  • productivity With Technology
  • save On Service And Maintenance
  • top-tier Service And Support
  • safety First
  • handle The Heat
  • attachments To Meet Your Needs
  • performance With Less Fuel

Photos

Highlights

  • Saginaw, Michigan
  • 2022
  • Caterpillar
  • Large Wheel Loaders 990K Steel Mill Arrangement
  • Type: Cat-Planetenlastschaltgetriebe
  • Available
  • B-Pin - Maximum Lift: 19.2 ft

Specifications

  • 2022
  • Caterpillar
  • Large Wheel Loaders
  • 990K Steel Mill Arrangement
  • Large
  • Cat®
  • Model: C27 ™
  • Net: 699 HP | Rated Speed - Gross - ISO 14396: 752 HP | Rated Speed - Net Power - SAE J1349 - High Ambient: 648 HP | Gross - ISO 14396: 752 HP | Net Power - SAE J1349: 699 HP | Rated Speed - Gross - SAE J1995: 766 HP
  • Torque Rise: 18 % | Peak Torque - 1,200 rpm: 2624 lb/ft
  • 1800 r/min
  • 5.4 in
  • 6 in
  • 1649.5 in³
  • Entspricht EPA Tier 4 Final/Tier 2 (USA)
  • Type: Cat-Planetenlastschaltgetriebe
  • Forward - 1: 4.5 mile/h | Direct Drive - Forward: Lock-up disabled
  • Forward - 2: 8.3 mile/h | Direct Drive - Forward: 8.5 mile/h
  • Forward - 3: 14.2 mile/h | Direct Drive - Forward: 15.2 mile/h
  • 1: 4.9 mile/h | 2: 9.1 mile/h | 3: 15.5 mile/h | Direct Drive - 1: 5.4 mile/h | Direct Drive - 2: 9.6 mile/h | Direct Drive - 3: 16.4 mile/h
  • SAE J1473 OKT90, ISO 3450:1992
  • Raise: 9.4 s | Dump: 2.9 s | Rack Back: 4.8 s | Lower: 3.7 s | Lower Float Down: 3.6 s | Total Hydraulic - Empty Bucket: 15.9 s
  • Machine (ISO 6395:2008): 113 dB(A) | Operator (ISO 6396:2008): 69 dB(A)
  • Maximum at 1,800 rpm: 22.2 gal/min | Maximum at 1,800 rpm: 216 gal/min | Maximum at 1,400 rpm: 94.5 gal/min
  • Piston, variable displacement
  • Relief Valve Setting - Lift/Tilt: 4786 psi | Relief Valve Setting: 507 psi | Relief Valve Setting - Steering: 4641 psi
  • Cylinders, Double Acting - Tilt, Bore and Stroke: 12.5 in × 32.2 in (317.5 mm × 819 mm) | Cylinders, Double Acting - Lift, Bore and Stroke: 10 in × 49.8 in (254 mm × 1264 mm) | Oscillation Angle: 8.5° | Total Steering Angle: 70° | Reach - Maximum Lift: 7.2 ft | Ground to Top of ROPS: 17.2 ft | Clearance at Maximum Lift: 13.4 ft | Ground to Top of Hood: 12.7 ft | Rear Axle - Centerline to Bumper: 12.5 ft | Ground to Center of Front Axle: 3.9 ft | Dump Angle at Maximum Lift: 47.4 degrees | Rack Back Angle - Carry: 48.8 degrees | Front Axle Centerline to Bucket Tip: 14.2 ft | Rack Angle at Maximum Lift: 63.7 degrees | Ground to Top of Exhaust Stacks: 16.6 ft | Rack Back Angle - Ground Level: 40.4 degrees
  • B-Pin - Maximum Lift: 19.2 ft
  • Maximum - Bucket Raised: 27 ft
  • Maximum: 41.8 ft
  • to Lower Hitch: 2 ft | to Bumper: 3.5 ft
  • 15.1 ft
  • Cat Truck Match - Standard: 773-775 | Axle front: Fixed | Axle rear: Trunnion
  • Bucket Range: 11.25 yd3-12 yd3 (8.6 m3-9.2 m3) | Bucket: 11.2-12 yd3 (8.6-9.2 m3)
  • Engine Crankcase: 20 gal (US)
  • Tank: 294.3 gal (US)
  • 54.9 gal (US)
  • Rated: 17.5 t
  • Tank - Implement and Hydraulic Fan: 68.9 gal (US) | System Factory Fill: 210 gal (US)
  • 204693 lb