2022 Caterpillar Large Wheel Loaders 992K

Information

2022 Caterpillar Large Wheel Loaders 992K

THE LOADER YOU CAN COUNT ON

Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that's both safe to operate, productive and durable. With the introduction of the K Series, we've enhanced the operator's experience and the safety of those working on and around the machine. With both standard and high lift configurations, this machine will pass match with fleets of 775, 777, and 785 trucks. If your operations revolve around the 992 as a loading tool, you'll find everything that's important to your business in the 992K; safety, productivity, cost control and comfort for your people.

A PERFECT LOADING AND HAULING MATCH

Setting the standards for productivity, durability and safety.

AVAILABLE WITH STANDARD AND HIGH LIFT

Will pass match with fleets of 775, 777 and 785 trucks.

BUILT TO ACHIEVE MULTIPLE LIFECYLES

Withstands the toughest loading conditions...rebuild after rebuild.

Features may include:
  • structures
  • power Train
  • hydraulics
  • operator Station
  • technology Solutions
  • cat® Minestar System
  • safety
  • serviceability
  • customer Support
  • sustainability
  • buckets And Ground Engaging Tools
  • system Match Efficiency

Photos

Highlights

  • Saginaw, Michigan
  • 2022
  • Caterpillar
  • Large Wheel Loaders 992K
  • Type: Cat Planetary Power Shift
  • Available
  • Tread: 10.83 ft
  • B-Pin - Maximum Lift: 24.58 ft

Specifications

  • 2022
  • Caterpillar
  • Large Wheel Loaders
  • 992K
  • Large
  • Cat®
  • Model: C32 ACERT™
  • Net: 814 HP | Emissions (Tier 2 Equivalent): Gross Power - SAE J1995: 907 HP | Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995: 814 HP | Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349: 814 HP | Emissions (Tier 2 Equivalent): Net Power - SAE J1349: 814 HP |Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995: 900 HP | Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396: 884 HP | Emissions (Tier 2 Equivalent): Gross Power - ISO 14396: 884 HP | Emissions (Tier 2 Equivalent): Net Power - SAE J1995: 814 HP
  • Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995: 3514 lb/ft | Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995: 3537 lb/ft | Torque Rise: 30%
  • Emissions (U.S. EPA Tier 4 Final): 1750 r/min | Emissions (Tier 2 Equivalent): 1750 r/min
  • 5.7 in
  • 6.4 in
  • 1963.5 in³
  • Type: Cat Planetary Power Shift
  • Forward -1: 4.3 mile/h
  • Forward -2: 7.4 mile/h | Direct Drive - Forward: 8 mile/h
  • Forward - 3: 12.6 mile/h | Direct Drive - Forward: 14.2 mile/h
  • 1: 4.7 mile/h | 2: 8.1 mile/h | 3: 13.8 mile/h | Direct Drive - 2: 8.8 mile/h | Direct Drive - 3: 15.4 mile/h
  • Meet ISO 3450:2011
  • Total Hydraulic: 19.3 s | Dump: 1.8 s | Lower Float Down: 3.7 s | Raise: 9.4 s | Rack Back: 4.4 s | Steering - High Idle: 4.4 s | Steering - Low Idle: 6.4 s
  • Operator Level: The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
  • Lift/Tilt System: Variable Displacement Piston | Steering System: Piston, Variable Displacement
  • Maximum at 1,850 rpm: 254 gal/min | Maximum at 1,350 rpm: 95 gal/min
  • Relief Valve Setting - Lift/Tilt: 4500 psi | Steering Cut Off: 4500 psi
  • Lift Cylinder - Stroke: 45.2 in | Tilt Cylinder - Bore: 10.5 in | Lift Cylinder - Bore: 11 in | Tilt Cylinder - Stroke: 80.9 in | Oscillation Angle: 10° ±, 8° ± with Stops | Total Steering Angle: 86° | Rear Axle - Centerline to Bumper: 13.76 ft | Ground to Top of Exhaust Stacks: 17.22 ft | Rack Back Angle - Carry: 52.5 degrees | Rack Back Angle - Ground Level: 42.8 degrees | Ground to Center of Axles: 4.44 ft | Dump Angle at Maximum Lift: 50 degrees | Ground to Top of ROPS: 18.63 ft | Clearance at 45° Dump (Tooth Tip: 15.01 ft | Reach - Maximum: 6.86 ft | Ground to Top of Hood: 13.26 ft | Rack Back Angle - Maximum Lift: 65 degrees
  • B-Pin - Maximum Lift: 24.58 ft
  • Tread: 10.83 ft
  • Maximum - Bucket Raised: 33.08 ft
  • Maximum: 52.81 ft
  • to Lower Hitch: 2.24 ft | to Bumper: 3.86 ft
  • 19.32 ft
  • Axle front: Fixed | Axle rear: Oscillating
  • Bucket Range: 14-16 yd3 (10.7-12.3 m3)
  • AC: 0.071 gal (US) | Crankcase: 32 gal (US)
  • Tank: 413 gal (US)
  • 77 gal (US)
  • Rated - High Lift (Face Material): 21 t
  • System - Implement: 86 gal (US) | System - Steering: 42 gal (US)
  • 220089 lb | High Lift: 221847 lb