2022 Caterpillar Small Wheel Loaders 926M Aggregate Handler
- Year 2022
- Make Caterpillar
- Model Small Wheel Loaders
2022 Caterpillar Small Wheel Loaders 926M Aggregate Handler
2022 Caterpillar Small Wheel Loaders 926M Aggregate Handler
The Cat 926M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.
REDUCED BY 30% ENGINE SPEEDLower engine speed lowers fuel burn.
MORE CONTROLMore refined control with consistent and predictable stopping distances.
CLASS LEADING 64 DB(A) SOUND LEVELWhen running at 1,600 RPM in Standard Mode.
Features may include:- Application Specific Configuration
- Efficiently Powerful
- Enjoy All Day Comfort
- Customize Your Experience
- Service
- Customer Support
Engine
Engine Manufacturer
Cat®
Engine Type
Model: C7.1
Engine Power
Maximum Gross Power: 155 HP | Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4): 155 HP | Maximum Rated Gross Power - ISO 14396: 153 HP | Maximum Rated Gross Power - ISO 14396 (DIN: 155 HP | Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 148 HP | Rated Net Power: 148 HP | Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4: 149 HP | Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4): 153 HP | Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-): 146 HP | Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3): 142 HP | Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3): 144 HP | Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3): 141 HP | Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3): 148 HP | Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4). 151 HP
Engine Torque
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3): 531 ft·lbf | Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3): 511 ft·lbf | Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4): 531 ft·lbf | Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4): 511 ft·lbf | Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3): 517 ft·lbf | Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4): 517 ft·lbf | Maximum Steering Torque - 0° (Straight Machine): 37155 ft·lbf | Maximum Steering Torque - 40° (Full Turn). 27747 ft·lbf
Rated Engine Speed
Maximum Rated Gross Power (Performance Power Mode: Range 1-4): 1800 r/min | Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3): 1600 r/min
Bore
4 in
Stroke
5 in
Displacement
427 in³
Emissions
The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage IV off-highway emission standards.
Drivetrain
Gear Ratio (Primary)
Forward and Reverse - Range 2: 8 mile/h | Forward and Reverse - Range 3: 17 mile/h | Forward and Reverse - Range 1: 1-13 km/h (0.6-8 mph) | Forward and Reverse - Range 4: 25 mile/h
Operational
Cycle Time
Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed: 2.4 s | Full Left to Full Right - Minimum RPM: Pump Flow Limited: 2.8 s | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total: 9.6/10.5 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height): 1.5/1.7 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift): 5.5/6.2 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level): 2.6/2.6 seconds
Operating Conditions
Full Turn Tip Load: 17350 lb
Hydraulics
Hydraulic Flow
Maximum Flow - Steering Pump: 34 gal/min | Maximum Flow - Implement Pump: 40 gal/min | | Maximum Flow - Implement Pump - 4th Function Maximum Flow: 40 gal/min | Maximum Flow - Implement Pump - 3rd Function Maximum Flow: 40 gal/min
Maximum Pressure
Working - Steering Pump: 3500 psi | Relief Pressure - Tilt Cylinder: 4061 psi | Working - Implement Pump: 3771 psi | Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure: 4061 psi | Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure: 3771 psi
Dimensions
Dimensions
Steering Cylinder, Double Acting - Stroke: 17.2 in | Steering Cylinder, Double Acting - Bore Diameter: 2.8 in | Steering Cylinder, Double Acting - Rod Diameter: 1.6 in | Tilt Cylinder, Double Acting - Stroke: 21.9 in | Tilt Cylinder, Double Acting - Bore Diameter: 5.1 in | Tilt Cylinder, Double Acting - Rod Diameter: 2.8 in | Lift Cylinder, Double Acting - Rod Diameter: 2.4 in | Lift Cylinder, Double Acting - Bore Diameter: 4.3 in | Lift Cylinder, Double Acting - Stroke: 28.7 in | Rear Axle - Oscillation Angle by Tire Size - 17.5 R25: ± 13.5 degrees | Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65: ± 10.5 degrees
Capacities
Features
Transmission - Gear Box: 2.2 gal (US)
Volume
Bucket: 3.9-6.5 yd³ (3.0-5 m³)
Oil capacity
Engine Crankcase: 5.3 gal (US)
Fuel Capacity
Diesel Exhaust Fluid (DEF) Tank: 5 gal (US) | Tank: 51.5 gal (US)
Cooling System
7.9 gal (US)
Hydraulic Capacity
Tank: 23.8 gal (US) | System - Including Tank: 42.3 gal (US)
Axle Capacity, Rear
5.5 gal (US)
Axle Capacity, Front
5.5 gal (US)
Weights
Weight, In Running Order
29256 lb | Full Turn Tip Load: 17350 lb
Features
Features
Front Axle: Fixed | Rear Axle: Oscillating