2022 Caterpillar Small Wheel Loaders 930M Aggregate Handler

Information

2022 Caterpillar Small Wheel Loaders 930M Aggregate Handler

The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

REDUCED BY 30% ENGINE SPEED

Lower engine speed lowers fuel burn.

MORE CONTROL

More refined control with consistent and predictable stopping distances.

CLASS LEADING 64 DB(A) SOUND LEVEL

When running at 1,600 RPM in Standard Mode.

Features may include:
  • Application Specific Configuration
  • Efficiently Powerful
  • Enjoy All Day Comfort
  • Customize Your Experience
  • Service
  • Customer Support

Photos

Highlights

  • Saginaw, Michigan
  • 2022
  • Caterpillar
  • Small Wheel Loaders 930M Aggregate Handler
  • Available

Specifications

  • 2022
  • Caterpillar
  • Small Wheel Loaders
  • 930M Aggregate Handler
  • Small
  • Cat®
  • Model: C7.1
  • Maximum Gross Power: 170 HP | Maximum Rated Gross Power - ISO 14396: 164 HP | Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4): 164 HP | Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4): 166 HP | Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 157 HP | Maximum Rated Gross Power - ISO 14396 (DIN): 166 HP | Rated Net Power: 157 HP | Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 160 HP | Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3): 156 HP | Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4): 162 HP | Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3): 160 HP | Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3): 162 HP | Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3): 158 HP | Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3): 154 HP
  • Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4): 592 ft·lbf | Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3): 592 ft·lbf | Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4): 566 ft·lbf | Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3): 566 ft·lbf | Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3): 572 ft·lbf | Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4): 572 ft·lbf | Maximum Steering Torque - 0° (Straight Machine): 37155 ft·lbf | Maximum Steering Torque - 40° (Full Turn): 27747 ft·lbf
  • Maximum Rated Gross Power (Performance Power Mode: Range 1-4): 1800 r/min | Maximum Rated Gross Power (Standard Power Mode: Range 1-3): 1600 r/min
  • 4 in
  • 5 in
  • 427 in³
  • Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
  • Forward and Reverse - Range 3: 17 mile/h | Forward and Reverse - Range 1: 1-13 km/h (0.6-8 mph) | Forward and Reverse - Range 2: 8 mile/h | Forward and Reverse - Range 4: 25 mile/h
  • Spring applied hydraulically released
  • Full Turn Tip Load: 19563 lb
  • Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift): 5.1/5.7 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height): 1.5/1.7 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level): 2.7/2.7 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total: 9.3/10.1 seconds | Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited: 2.8 s
  • Maximum Flow - Implement Pump: 50 gal/min | Maximum Flow - Implement Pump - 3rd Function: 50 gal/min | Maximum Flow - Steering Pump: 34 gal/min
  • Relief Pressure - Tilt Cylinder: 4061 psi | Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure: 4061 psi | Relief Pressure - Tilt Cylinder - 3rd Function Working: 3626 psi | Working - Implement Pump: 3626 psi | Working - Steering Pump: 3500 psi
  • Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65: ± 10.5 degrees | Lift Cylinder, Double Acting - Rod Diameter: 2.6 in | Lift Cylinder, Double Acting - Stroke: 28.7 in | Tilt Cylinder, Double Acting - Rod Diameter: 3.5 in | Tilt Cylinder, Double Acting - Stroke: 21.9 in | Lift Cylinder, Double Acting - Bore Diameter: 4.7 in | Tilt Cylinder, Double Acting - Bore Diameter: 5.9 in | Steering Cylinder, Double Acting - Bore Diameter: 2.8 in | Steering Cylinder, Double Acting - Rod Diameter: 1.6 in | Steering Cylinder, Double Acting - Stroke: 17.2 in
  • Rear Axle: Oscillating | Front Axle: Fixed
  • Bucket: 3.3-3.5 yd3 (2.5-2.7 m3)
  • Engine Crankcase: 5.3 gal (US)
  • Diesel Exhaust Fluid (DEF) Tank: 5 gal (US) | Tank: 51.5 gal (US)
  • 7.9 gal (US)
  • Tank: 23.8 gal (US) | System - Including Tank: 43.6 gal (US)
  • 6.9 gal (US)
  • 6.6 gal (US)
  • 31144 lb