2022 Caterpillar Small Wheel Loaders 930M Waste Handler
- Year 2022
- Make Caterpillar
- Model Small Wheel Loaders
2022 Caterpillar Small Wheel Loaders 930M Waste Handler
2022 Caterpillar Small Wheel Loaders 930M Waste Handler
The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
REDUCED BY 30% ENGINE SPEEDLower engine speed lowers fuel burn.
MORE CONTROLMore refined control with consistent and predictable stopping distances.
CLASS LEADING 64 DB(A) SOUND LEVELWhen running at 1,600 RPM in Standard Mode.
Features may include:- Application Specific Configuration
- Efficiently Powerful
- Enjoy All Day Comfort
- Customize Your Experience
- Service
- Customer Support
Engine
Engine Manufacturer
Cat®
Engine Type
Model: C7.1
Engine Power
Maximum Gross Power: 170 HP | Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4): 160 HP | Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4): 166 HP | Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4): 164 HP | Maximum Rated Gross Power - ISO 14396 (DIN): 166 HP | Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4): 157 HP | Maximum Rated Gross Power - ISO 14396: 164 HP | Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3): 154 HP | Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4): 162 HP | Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3): 160 HP | Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3): 162 HP | Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3): 156 HP | Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3): 158 HP
Engine Torque
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4): 572 ft·lbf | Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3): 592 ft·lbf | Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4): 566 ft·lbf | Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4): 592 ft·lbf | Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3): 566 ft·lbf | Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3): 572 ft·lbf | Maximum Steering Torque - 0° (Straight Machine): 37155 ft·lbf | Maximum Steering Torque - 40° (Full Turn) 27747 ft·lbfMaximum Steering Torque - 40° (Full Turn): 27747 ft·lbf
Rated Engine Speed
Maximum Rated Gross Power (Performance [HP+] Power Mode: Range 1-4): 1800 r/min | Maximum Rated Gross Power (Standard Power Mode: Range 1-3): 1600 r/min
Bore
4 in
Stroke
5 in
Displacement
427 in³
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Drivetrain
Gear Ratio (Primary)
Forward and Reverse - Range 4: 25 mile/h | Forward and Reverse - Range 3: 17 mile/h | Forward and Reverse - Range 2: 8 mile/h | Forward and Reverse - Range 1: 1-13 km/h (0.6-8 mph)
Brakes
Parking Brake
Spring applied hydraulically released
Operational
Cycle Time
Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift): 5.1/5.7 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height): 1.5/1.7 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level): 2.7/2.7 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total: 9.3/10.1 seconds | Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed: 2.4 s | Full Left to Full Right - Minimum RPM: Pump Flow Limited: 2.8 s
Operating Conditions
Full Turn Tip Load: 18163 lb
Performance
Noise Level
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A) | Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)
Hydraulics
Hydraulic Flow
Maximum Flow - Implement Pump: 50 gal/min | Maximum Flow - Implement Pump - 3rd Function: 50 gal/min | Maximum Flow - Steering Pump: 34 gal/min
Maximum Pressure
Working - Implement Pump: 3626 psi | Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure: 4061 psi | Relief Pressure - Tilt Cylinder: 4061 psi | Relief Pressure - Tilt Cylinder - 3rd Function Working: 3626 psi | Working - Steering Pump: 3500 psi
Dimensions
Dimensions
Lift Cylinder, Double Acting - Stroke: 28.7 in | Lift Cylinder, Double Acting - Rod Diameter: 2.6 in | Lift Cylinder, Double Acting - Bore Diameter: 4.7 in | Tilt Cylinder, Double Acting - Bore Diameter: 5.9 in | Tilt Cylinder, Double Acting - Rod Diameter: 3.5 in | Tilt Cylinder, Double Acting - Stroke: 21.9 in | Steering Cylinder, Double Acting - Bore Diameter: 2.8 in | Steering Cylinder, Double Acting - Rod Diameter: 1.6 in | Steering Cylinder, Double Acting - Stroke: 17.2 in | Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65: ± 10.5 degrees
Capacities
Volume
Bucket: 3.9-6.5 yd3 (3.0-5 m3)
Features
Transmission - Gear Box: 2.2 gal (US)
Cooling System
7.9 gal (US)
Fuel Capacity
51.5 gal (US) | Diesel Exhaust Fluid (DEF) Tank: 5 gal (US)
Hydraulic Capacity
23.8 gal (US) | System - Including Tank: 43.6 gal (US)
Oil capacity
Engine Crankcase: 5.3 gal (US)
Axle Capacity, Rear
6.6 gal (US)
Axle Capacity, Front
6.9 gal (US)
Weights
Weight, In Running Order
33396 lb
Features
Features
Rear Axle: Oscillating | Front Axle: Fixed