2022 Caterpillar Small Wheel Loaders 938M Aggregate Handler
- Year 2022
- Make Caterpillar
- Model Small Wheel Loaders
2022 Caterpillar Small Wheel Loaders 938M Aggregate Handler
2022 Caterpillar Small Wheel Loaders 938M Aggregate Handler
The Cat® 938M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
REDUCED BY 30% ENGINE SPEEDLower engine speed lowers fuel burn.
MORE CONTROLMore refined control with consistent and predictable stopping distances.
CLASS LEADING 64 DB(A) SOUND LEVELWhen running at 1,600 RPM in Standard Mode.
Features may include:- Application Specific Configuration
- Efficiently Powerful
- Enjoy All Day Comfort
- Customize Your Experience
- Service
- Customer Support
Engine
Engine Manufacturer
Cat®
Engine Type
Model: C7.1 ACERT™
Engine Power
Maximum Gross Power: 190 HP | Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 190 HP Rated Net Power: 182 HP | Maximum Rated Gross Power - ISO 14396: 188 HP | Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 182 HP | Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4): 188 HP | Maximum Rated Gross Power - ISO 14396 (DIN): 190 HP | Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 184 HP | Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3): 173 HP | Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3): 168 HP | Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3): 171 HP | Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4): 186 HP | Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3): 169 HP | Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3): 175 HP
Engine Torque
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4): 648 ft·lbf | Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3): 648 ft·lbf | Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4): 628 ft·lbf | Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3): 628 ft·lbf | Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4): 621 ft·lbf | Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3): 621 ft·lbf
Rated Engine Speed
Maximum Rated Gross Power (Performance Power Mode: Range 1-4): 1800 r/min | Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3): 1600 r/min
Bore
4 in
Stroke
5 in
Displacement
427 in³
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Drivetrain
Gear Ratio (Primary)
Forward and Reverse - Range 4: 25 mile/h | Forward and Reverse - Range 1: 1-13 km/h (0.6-8 mph) | Forward and Reverse - Range 2: 8 mile/h | Forward and Reverse - Range 3: 17 mile/h
Brakes
Parking Brake
Spring applied hydraulically released
Operational
Cycle Time
Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height): 1.5/1.7 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total: 9.7/10.6 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift): 5.5/6.2 seconds | Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level): 2.7/2.7 seconds | Steering - Full Left to Full Right - Minimum RPM: Pump Flow Limited: 3.1 s | Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed: 2.3 s
Operating Conditions
Full Turn Tip Load: 23466 lb
Performance
Noise Level
Declared: Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A) – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)
Hydraulics
Hydraulic Flow
Maximum Flow - Implement Pump: 50 gal/min | Maximum Flow - Implement Pump - 3rd Function: 50 gal/min | Maximum Flow - Steering Pump: 34 gal/min
Maximum Pressure
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure: 4351 psi | Relief Pressure - Tilt Cylinder: 4351 psi | Working - Implement Pump: 4061 psi | Relief Pressure - Tilt Cylinder - 3rd Function Working: 4061 psi | Working - Steering Pump: 3500 psi
Dimensions
Dimensions
Tilt Cylinder, Double Acting - Bore Diameter: 5.9 in | Tilt Cylinder, Double Acting - Rod Diameter: 3.5 in | Tilt Cylinder, Double Acting - Stroke: 21.9 in | Lift Cylinder, Double Acting - Stroke: 31.1 in | Lift Cylinder, Double Acting - Bore Diameter: 4.7 in | Lift Cylinder, Double Acting - Rod Diameter: 2.6 in | Steering Cylinder, Double Acting - Bore Diameter: 3.1 in | Steering Cylinder, Double Acting - Rod Diameter: 2 in | Steering Cylinder, Double Acting - Stroke: 15.7 in | Rear Axle - Oscillation Angle by Tire Size - 23.5 R25: ± 7 degrees
Capacities
Features
Transmission - Gear Box: 2.9 gal (US)
Volume
Bucket: 3.8-4.2 yd3 (2.9-3.2 m3)
Oil capacity
Engine Crankcase: 5.3 gal (US)
Fuel Capacity
Diesel Exhaust Fluid (DEF) Tank: 5 gal (US) | Tank: 51.5 gal (US)
Cooling System
8.5 gal (US)
Hydraulic Capacity
System - Including Tank: 44.9 gal (US) | tank: 23.8 gal (US)
Axle Capacity, Rear
9.2 gal (US)
Axle Capacity, Front
9.2 gal (US)
Weights
Weight, In Running Order
36075 lb
Features
Features
Rear Axle: Oscillating | Front Axle: Fixed