2022 Caterpillar Commercial Propulsion Engines C32 Tier4 / IMO III

Information

2022 Caterpillar Commercial Propulsion Engines C32 Tier4 / IMO III

Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)

Features may include:

Air Inlet System
  • Separate-circuit aftercooling – no sea water in aftercooler
Emissions
  • Utilizes scr technology to enable u.S. EPA Tier 4 Final emission regulations compliance while lowering operational costs, IMO III emissions compliant
Control Strategy
  • Utilizes closed loop air assisted def dosing control strategy that delivers: highest efficiency mixing and control to lower operational costs, extends emissions useful life, ensures compliance, flexible to urea quality
Fuel System
  • Enhanced control of fuel injection optimized through crank timing and the A4 ecm technology
Power Reserve
  • Industry leading power reserve
Certifications
  • Wide range of available marine society certifications
Warranty
  • Industry-leading warranty coverage for factory packaged components
Service
  • Global dealer network for service in any location

Photos

Highlights

  • Saginaw, Michigan
  • 2022
  • Caterpillar
  • Commercial Propulsion Engines C32 Tier4 / IMO III
  • Configuration: Vee 12
  • Diesel
  • Minimum Engine: 6950 lb | Maximum Engine: 7160 lb
  • Available
  • Minimum: 57.1 in | Maximum: 57.3 in | 6 Brick Z-Flow: 43.5 in | 6 Brick U-Flow: 56.9 in | Dosing Cabinet: 18.8 in
  • Minimum: 59.3 in | Maximum: 63.5 in | 6 Brick Z-Flow: 23.5 in | 6 Brick U-Flow: 23.5 in | Dosing Cabinet: 22.8 in

Specifications

  • 2022
  • Caterpillar
  • Commercial Propulsion Engines
  • C32 Tier4 / IMO III
  • General
  • Configuration: Vee 12
  • Range: 61-1450 bhp (46-1072 bkW)
  • 1600-2150 rpm
  • 5.71 in
  • 6.38 in
  • 1959 in³
  • Heat exchanger or keel cooled
  • 4-stroke
  • Turbocharged-aftercooled
  • U.S. EPA Tier 4 Final certified IMO III emissions certified (SCR required)
  • Diesel
  • Electronic (A5 ECM)
  • Oil Change Interval: 1000 hrs - deep pan
  • Minimum: 59.3 in | Maximum: 63.5 in | 6 Brick Z-Flow: 23.5 in | 6 Brick U-Flow: 23.5 in | Dosing Cabinet: 22.8 in
  • Minimum: 83.9 in | Maximum: 89.8 in | 6 Brick Z-Flow: 147.7 in | 6 Brick U-Flow: 85 in | Dosing Cabinet: 37.4 in
  • Minimum: 57.1 in | Maximum: 57.3 in | 6 Brick Z-Flow: 43.5 in | 6 Brick U-Flow: 56.9 in | Dosing Cabinet: 18.8 in
  • Refill: Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan
  • 6 Brick Z-Flow: 1246 lb | 6 Brick U-Flow: 1235 lb | Dosing Cabinet: 209 lb
  • Minimum Engine: 6950 lb | Maximum Engine: 7160 lb
  • Rotation from Flywheel End: Counterclockwise | Flywheel Housing: SAE No. 0 with SAE No. 18 flywheel (136 teeth)